Skip to Content

How to Light a Gas Fire Pit Full Guide of 2022

This site is supported by our readers. We may earn a commission, at no cost to you, if you purchase through links.

Strike a match and also create a blaze, invite a couple of buddies and resolve in for a good night under the celebrities. Who does not enjoy sharing tales around the warmth of an open flame? It’s simply among the reasons backyard fire pits have actually ended up being so preferred. For this write-up’s purposes, we’re going to concentrate on exactly how to light a gas fire pit!

First Things First: Which Gas To Choose?

Prior to we learn exactly how to light or fire pits, let’s choose which gas we want to fuel it.

Fluid lp is thought about an eco-friendly gas. It burns easily without generating any type of toxicity into the atmosphere. It generates little to no dangerous contaminants and is excellent if you’re attempting to reduce your carbon impact. It is unlikely to trigger any type of damage, even if it develops a leak. Store your gas tank outside, at the very least 10 feet away from your heating source.

Natural gas is a blend of several different gases. Thought about one of the cleanest gas, it does produce greenhouse gases into the atmosphere that might be unsafe. Offered to your house straight with a gas line, it is more affordable and also extremely convenient. Speak to a professional regarding a gas line out to your gas fire pit.

Flame First

Despite what type of gas your fire it makes use of, you have to ensure that you obtain the fire going before you transform the gas on. It could seem back-to-front, but if you do not obtain ignition first, the gas will certainly circulate around the logs and ignite with a bang and possibly with a leaping blaze causing the extremely genuine potential for a burn. A gas fire pit does not have a pilot light It requires to be lit from square one each time. Some versions have a piezoelectric spark generator, yet if yours doesn’t, you’ll desire a wand lighter or a match.

Ignition And Burner Systems

Several ignition as well as heater systems come totally put together and ready for a professional to install. As soon as the connection is full, the procedure and upkeep are quite easy. A push-button ignition system includes control components with a battery-operated valve box.

Action 1 — Press the control handle to start the circulation of pilot gas. At the very same time, press the ignition switch to create a trigger.

Step 2 — Release the spark button after the pilot ignition has actually taken place after that release the valve control knob after regarding 20 secs.

Step 3 — Turn the control knob counterclockwise to light the primary heater.

Action 4 — Blaze height can be readjusted by transforming the control handle. If the loss of fire occurs, the system will transform off the gas flow.

Step 5 — Simply transforming the knob to the off setting will certainly close down the burner as well as cease gas flow.

When picking your burner, make sure it fits with your ignition system. As well tiny and it might cause dangerous back stress of liquid propane, while one that is as well he might cause a weak fire.

Piezoelectric Generator

Whether your fire pit has a piezoelectric generator or not, you need to transform the control to off prior to opening up the gas shutoff on your gas supply. The control button is normally in a clearly significant location, behind a gain access to door or panel on the front of the fire pit. The gas on some models is controlled by a clearly visible pole with a handle on completion.

Designs With Piezoelectric Starters

Step 1 — Press in the piezoelectric starter switch. It’s generally red and also positioned beside the control knob. You should listen to a collection of clicking noises to show sparks being created.

Action 2 — Push in the control handle as well as transform it to the on position while you maintain the stimulate generator button dispirited. Release the spark button as quickly as the fire lights, but keep holding the control knob.

Action 3 — Continue depressing the handle for 30 to 45 seconds to give the thermocouple time to heat up, Release the knob. If the fire goes out, repeat the ignition treatment, and now, hold in the handle a little longer.

Versions Without Piezoelectric Starters

Step 1 — Light a wand lighter as well as hold it near the top of the fire pit’s facility. It is generally best to place it right into a crevice to keep it out of the wind.

Action 2 — Turn the control to the on placement and get rid of the lighter as quickly as the fires start shedding.

Step 3 — Adjust the control to regulate the height of the fires.

Stainless Steel Burner Pipe

The stainless steel burner pipe is an extremely simple, reliable method to obtain your fire up and also running within seconds, also if your timber is somewhat wet. This technique removes the need for tinder and kindling. You will require to have a devoted gas line going to your fire pit, outfitted with a security switch and accompanying secret for simple turn on/shut off procedure. Your fire pit will certainly also need a log grate to cradle the firewood above the log lighter. This permits suitable oxygen flow, which further advertises a secure ignition and cleaner burn.

Action 1 — Stack your fire wood on the log grate in your fire pit. Bear in mind to keep the gas off while executing this action.

Step 2 — Once you’re ready to light your fire, gradually transform the shutoff key. Fuel will enter the log lighter and begin emitting via the precision drill portholes.

Action 3 — With a long-stemmed lighter, or suit, put just under the facility of the gadget, spark a fire

Step 4 — Remember to shut off the gas as well as remove your trick as quickly as your timber is burning.

The stainless steel burner pipe need to be used based on your neighborhood fire codes. Fuel line installation can be complicated, so call a licensed expert.

Electronic Fire Pit

Developed with all the security convenience attributes in mind, this ingenious means of lighting a fire in your backyard gas pit fire is most likely one of the easiest techniques. This remote-controlled ignition system is the method to go if you choose a gas-burning function in your outside space. Keep in mind to consult your local fire security codes relating to gas features prior to thinking about the enhancement of a natural or gas fire pit.

Action 1 — Use the remote to turn the system on.

Step 2 — An initial security check is performed prior to beginning the circulation of gas. Within just 5 seconds, the hot surface igniter begins to radiance, igniting the pilot fire.

Step 3 — Once the system spots the pilot flame, the gas flowing right into the primary burner is sparked.

Action 4 — Use the remote to transform the system off.

Fire sensing technology continuously monitors the blaze condition and inner temperatures/voltage. If the flame extinguishes for any kind of factor, the system will transform off all gas circulation before automatically attempting a restart.

Adhere to the safety and security directions and also delight in a little warmth on a cool night in your yard.

References
  • owntheyard.com
Avatar for Mutasim Sweileh
Mutasim Sweileh

Mutasim is a published author and software engineer and agriculture expert from the US. To date, he has helped thousands of people make their yards lush and thick.