Skip to Content

How to Remove a Lawn Mower Spark Plug: a Step-by-step Guide for Proper Maintenance (2023)

This site is supported by our readers. We may earn a commission, at no cost to you, if you purchase through links.

Keeping your mower’s spark plug in top shape is essential for a well-running lawnmower. As with any engine, regular maintenance of the spark plug ensures that it will ignite fuel and air correctly, every time you turn on the machine.

An old proverb says, An ounce of prevention is worth a pound of cure. When it comes to maintaining your mowing machine, replacing its worn out parts before they cause major problems can save you both money and time down the road.

Let’s look at how to remove a lawn mower spark plug safely and effectively.

Importance of Maintaining Your Lawn Mower Spark Plug

how to remove a lawn mower spark plug
Regular lawn mower maintenance is essential for keeping your engine running efficiently. One of the most important components to maintain is the spark plug; it plays a crucial role in igniting fuel-air mixture and providing power to your machine.

Faulty spark plugs can cause significant problems with performance, so you should take note if you notice any black carbon deposits or oily residue around them. Replacing these parts regularly will ensure they’re functioning correctly and provide numerous benefits, such as improved acceleration and reliability – saving you time and money in the long run!

Why Regular Maintenance is Important

Regularly maintaining your lawn mower spark plug is essential for keeping it running efficiently and avoiding costly repairs down the line. Spark plugs use electricity to ignite fuel-air mixture, so inspecting and changing them regularly can improve efficiency and reduce wear on other engine components.

To ensure proper maintenance, check the spark plug according to your owner’s manual. Change the oil frequently. Clean or replace old/fouled plugs if needed. Adjust gaps with the gauge specified by the manufacturer.

With regular maintenance — inspect spark plug, change oil, clean/replace fouled plugs, set gap with a gapping tool, replace new sparks — you can keep your lawn mower running optimally without expensive repairs!

Signs of a Faulty Spark Plug

You can easily tell if your spark plug needs replacing by looking for black carbon deposits or oily residue. Identifying symptoms of a faulty spark plug is the first step in troubleshooting techniques to help you get back up and running with your lawn mower.
Common causes might include worn out plugs, dirt build-up around the metal spring clip, or air/fuel mixture issues causing misfires from a dead battery.
Different types of spark plugs may be needed for replacement, depending on your engine. Some require cleaning before installation, while others should just be replaced outright as they’re not meant to last long-term.
To remove the old one, use either a specialized spark plug socket wrench or regular socket and turn it counterclockwise until it’s loose enough to come off by hand. This prevents damage due to over tightening when using too much force.
Finally, adjust gap size according to manufacturer specs so new sparks will ignite fuel at peak efficiency, increasing its performance longevity.

Benefits of Replacing Your Spark Plug

Replacing your spark plug can significantly improve the performance and longevity of your engine, so don’t wait – do it now!

It’s important to ensure all removable parts are correctly replaced with new ones. Spark plugs should be regularly checked for any signs of wear and tear or damage. Faulty spark plugs can reduce efficiency.

Cleaning the air filter periodically and using fuel additives will help optimize performance further. Using a spark plug gap gauge, measure the gap between electrodes on each individual cylinder when replacing them. This ensures they provide optimal ignition to combustion ratios to function properly.

Adding some engine oil into each hole before installing new plugs helps create an effective seal. This prevents loss of power due to leaks in compression chambers. It also protects against corrosion over time.

Tools Needed for Removing a Lawn Mower Spark Plug

Tools Needed for Removing a Lawn Mower Spark Plug
Removing a lawn mower spark plug requires specific tools: a wrench, socket, and spark plug gap gauge. The wrench disconnects the lead from the spark plug. Use either a regular socket or one designed for removing spark plugs. An appropriate-sized gap gauge checks and adjusts any necessary changes on your new replacement before installation.


Getting that old part out of the way is a breeze with the right wrench! When working on your lawn mower’s spark plug, it’s important to use a lubricating wrench to prevent corrosion. Be familiar with various tightening techniques and socket sizes to get the job done quickly and safely. Understand different types of wrenches to choose one best suited for this task: friction fit, spark plug lead removal tool or regular sockets are all appropriate tools.

After disconnecting the wire using pliers, apply drops of engine oil into hole before unscrewing. Check for black carbon deposits or oily residue while doing so. Cycle piston by pulling starter cord until properly running again.


You’ll need a socket or spark plug lead removal tool to unscrew the old part and make room for the new one.
Having regular spark plug replacements ensures better fuel economy, fewer repairs, improved performance and correct torqueing.
A regular socket is suitable for most applications; however, you may need a specialized socket if the spark plug has protruding electrodes or small metal oil seals.
Check with your local auto parts store to see what size your spark plug needs so you can buy the right socket.

Spark Plug Gap Gauge

To ensure the new spark plug is installed correctly, you’ll need a gap gauge to check and adjust the width between its electrodes. This helps set the right ignition timing, affecting spark strength and the engine’s performance. The type of plug material used may also have an effect. When changing oil, inspect the spark plug for black carbon deposits or oily residue, as these can reduce efficiency if left unchecked.

Hutson Inc.’s Performance Edge maintenance packages provide all necessary tools, like a gap gauge, to keep your engine running at peak performance levels.

How to Remove a Lawn Mower Spark Plug

How to Remove a Lawn Mower Spark Plug
Disconnect the lead. Clean around the plug. Remove it using a socket. Check and set the gap according to your owner’s manual. Replace it with a new one. Tighten until its washer compresses. Re-install the lead.

Removing a lawn mower spark plug is an important part of regular maintenance. It’s easy to do and will keep your mower running properly.

Just follow these steps:

Disconnect the lead.
Clean around the plug.
Remove it using a socket.
Check and set the gap according to your owner’s manual.
Replace it with a new one.
Tighten until its washer compresses.
Re-install the lead.

That’s it! Your lawn mower spark plug is now ready for use.

Disconnecting the Lead

Disconnecting the lead should be done gently. It’s a fairly thick wire that carries energy from the ignition timing system into the spark plug. Any damage here could have serious implications for your mower’s performance.

Cleanliness is key – dirt and debris buildup around these contact points will affect how effectively they transfer electrical power. So use a cleaning process if necessary before reattaching after testing with a spark tester.

Remember: safety always comes first. Follow the cardinal rule of removing all fuel sources while working on any parts related to gas-powered engines!

You can get started on replacing your spark plug by carefully disconnecting the lead. Keep this in mind when you unclip or unscrew the connector.

Cleaning Around the Plug

Clean around the plug before you spark up your lawn mower engine – there’s no room for dirt and debris when it comes to a smooth running machine! Taking safety precautions is important. Make sure the spark plug condition is good, with no signs of oil leakage or other damage. If in doubt, seek professional advice, e.g. from Hutson Inc., who can help with all aspects of maintaining your lawn mower, including replacing spark plugs if necessary.

Check the air filter too. Replace it at least once a year, or more frequently depending on use. Replacing a spark plug only takes a couple of minutes, even if you don’t have a lot of tools. Just make sure to locate it correctly first – on walk-behinds and riding mowers it’s usually near the front, while zero-turns have them near the back of the engine.

Removing the Plug Using a Socket

Grab your socket and disconnect the lead from the spark plug to get started. Oil all the connecting wires – an important step. Troubleshoot potential issues before changing the spark plugs. Check gas and oil levels. Take a couple of hours for yourself or have a certified technician work on it if necessary. When threading in the end of the new plug, be gentle but firm – too tight or too loose can cause damage.

Checking and Setting the Gap

Now it’s time to check and set the gap on your spark plug, so grab your trusty spark plug gapping tool! Setting the gap is an important part of keeping your lawn mower in good working order. The right gap size depends on the type of spark plugs installed and should be checked each time you replace them.

To get started, make sure that all safety tips are followed such as wearing protective gear when working with small engine parts. Then clean off any dirt or debris around the area where you will be measuring with a rag or brush before taking out a measurement gauge to verify correct spacing between electrodes inside the plug’s tip.

After checking for proper distance, adjust accordingly using either pliers (for wider gaps) or a file (for narrower gaps). Finally use torque settings recommended by the manufacturer, if needed, when re-installing new plugs after ensuring they are properly seated into place using different types of wrenches depending upon their design specifications.

Great job getting this far! Now enjoy knowing that partaking in regular maintenance like setting up lawn mower’s spark plugs was easy enough for anyone – have fun knowing these steps helped save you some money while also protecting yourself from potential harm at the same time!

Replacing the Plug

Now that you’ve checked and set the gap, it’s time to replace your lawn mower spark plug for optimal performance. Cleaning around the plug before removal is essential as dirt can cause misfires and dead engines.

Depending on make/model of lawn mower, several types of plugs may be used so use caution when selecting the right one. Using a wrong type could damage engine components or connections.

Once in place, test to ensure proper seating by disconnecting lead wire from connector first then reconnecting it firmly afterwards. If done properly there should be no need for further adjustments!

Remember regular maintenance such as cleaning and replacing spark plugs keeps your engine running smoothly and extends its life. Certified technicians recommend having service appointments every 100 hours, or at least once per season depending on usage levels.

Tightening the Plug

Once you’ve selected the right fit, it’s time to tighten up your engine and reconnect with the power that lies beneath. Get ready for a smooth ride as you secure your spark plug and kickstart a new journey!

Before tightening the plug, check both sides of the wire connection for any leaks or corrosion that may be preventing optimum performance. Use an appropriate wrench to fasten until tight while checking tension levels throughout. If too loose, there won’t be enough compression when firing up. If too tight, wires can become damaged over time.

Replace wires safely back onto their respective terminals, then test spark by pulling starter cord several times. Check gap size has been used before starting lawn mower or zero-turn mower again.

If issues arise which can’t be resolved independently, don’t hesitate to call Hutson Inc. They offer parts and maintenance services for all types of push mowers and can assist in getting your machine running smoothly once more.

Re-installing the Lead

Now that your spark plug is in place, make sure to securely attach the lead and get ready to start mowing! Improving engine performance? It’s easy, just check connections and replace parts when necessary.

Re-installing the lead after changing a spark plug helps prevent damage from occurring due to loose or worn out connections.

Don’t worry about potential hazards – use Koenig Equipment’s John Deere Lawn Equipment. They’re local services will make sure all work is done safely and accurately. Enjoy improved performance without worry.

Tips and Tricks for Removing a Lawn Mower Spark Plug

Tips and Tricks for Removing a Lawn Mower Spark Plug
Are you having trouble with your lawn mower spark plug? Knowing how to adjust the gap and where it’s located on different types of mowers can save you time and money. To properly adjust the gap, it’s important to know what size it should be; this info can usually be found in your owner’s manual.

Understanding where a spark plug is on walk-behind or riding mowers vs zero-turns will also help when replacing one.

How to Adjust the Gap

To ensure the best performance, adjust the gap between your spark plug and engine using a gapping tool. This helps to optimize ignition timing, spark intensity, fuel ratio and lubrication effects.

Take note of any oil or carbon deposits on or around your old spark plug. If present, it may be necessary to replace parts instead of just adjusting them.

Measure existing gap with a gapping tool and refer to owner’s manual for proper size specification.

If too wide, use a flat object such as a screwdriver handle or pliers to gently press against a hard surface until desired width is achieved. If too narrow, use the gauge end of the tool to pry open slightly wider apart.

Clean threads on both sides before installing new plugs.

Thread new plugs into hole carefully, making sure not to cross thread. Then tighten by hand until the washer compresses, followed by an additional quarter turn from a wrench.

Following these steps will help maintain optimum performance for lawn mower engines!

Proper Gap Size

Check the owner’s manual for the proper gap size specification, and make any necessary adjustments with your gapping tool! Improving engine performance in lawn mowers starts with having properly functioning spark plugs. There are several types of spark plug brands available, but it’s important to choose one that best fits your specific model of mower. Replace them regularly; cleaning and lubricating each one before installation can help improve their longevity.

With a few simple tools such as a wrench, spark plug socket or regular socket, and a gap gauge you’ll be able to easily measure and adjust the right amount of space between electrodes so they can fire correctly when needed.

Remember: if you’re not comfortable making these adjustments yourself then Hutson Inc offers parts and maintenance services that will ensure optimum performance from your mower’s engine!

Location of Spark Plug on Different Lawn Mowers

Don’t be fooled – the spark plug may not always be in the same spot! On walk-behind or riding mowers, it’s usually near the front of the engine. But for zero-turns, it’s typically nearer the back.

When selecting a new spark plug, size it wisely. And make sure the gap settings are correct before replacing it. Clean fouled plugs beforehand, if necessary.

Knowing these key points about locating, sizing, choosing and replacing your spark plug can help ensure optimal engine performance and avoid costly repairs.

Hutson Inc Services for Lawn Mower Maintenance

Hutson Inc Services for Lawn Mower Maintenance

If you’re looking for help with lawn mower maintenance and repairs, Hutson Inc has got you covered. They have parts and services available, and can give you guidance if you want to do the repairs yourself.
They’re especially great at removing spark plugs – they’ll make sure it’s done right so you don’t have engine trouble later on.

Parts and Maintenance Services

Hutson Inc offers the parts and maintenance services you need to keep your engine running smoothly – so don’t wait, get it done now! Preventive care is essential for keeping your lawn mower in good condition and avoiding expensive repairs; that’s why Hutson Inc provides a range of services including mower troubleshooting, oil change, cleaning air filter replacement and spark plug replacement.

Here are five key benefits of regular maintenance:

  • Improved performance: Regularly replacing spark plugs ensures optimal combustion which improves engine power.
  • Reduced wear & tear on components: Cleaning out filters helps prevent dust buildup which can reduce the life span of internal components.
  • Lower risk of breakdowns or malfunctions over time: By regularly checking for signs of damage or malfunction before they become serious issues saves time & money down the line.
  • Better fuel efficiency: A well-maintained machine will use less gas due to better fuel/air mixture resulting from properly functioning ignition system.
  • Safer operation: Regular cleaning keeps debris away from moving parts reducing risks during operation.

Assistance for Diy Maintenance

If you’re feeling intimidated by DIY lawn mower maintenance, Hutson Inc has got you covered. They offer troubleshooting tips, scheduled maintenance plans, and assistance with all aspects of proper care for your engine.

DIY repair is always an option too. If engine troubles arise beyond simple adjustments or cleaning, Hutson Inc technicians can help diagnose and resolve them quickly.

With regular check-ups and service intervals, Hutson Inc will make sure your machine runs smoothly for years.

Benefits of Regular Lawn Mower Maintenance

Benefits of Regular Lawn Mower Maintenance
Regular lawn mower maintenance is a great way to prevent engine problems, extend the life of your machine, and save money on costly repairs. Change spark plugs regularly to ensure your mower has the electricity it needs to ignite its fuel-air mixture efficiently. Clean or replace parts like air filters and blades to keep them in optimal condition and prevent them from wearing out prematurely. Catch any issues early before they become major problems, saving you money on expensive repair work.

Preventing Engine Problems

By keeping up with regular maintenance, you can ensure your engine will last longer and prevent costly repairs. Check spark plugs, air filters, fuel efficiency, and ignition timing regularly to avoid wear and tear. Check spark strength at least once a year to make sure it’s firing correctly. If the gap between electrodes is too wide or narrow, use a spark plug gapping tool to adjust according to manufacturer specs in your owner’s manual. Replace any fouled or worn-out parts promptly; these can cause major problems over time. Taking care of these small details consistently will give you peace of mind that your lawn mower won’t let you down when it matters.

Extending the Life of Your Lawn Mower

By following regular maintenance guidelines, you can extend the life of your lawn mower and have peace of mind that it won’t let you down when it matters. Regular preventive care is essential for all types of mowers, from riding to zero-turns.

Check the air filter, oil level, spark plugs and other parts regularly to ensure everything is working as intended. Do oil changes before each season starts or after a certain number of hours are logged on the engine, depending on which comes first.

If any problems arise with these components or others during operation, address them immediately to avoid further damage due to wear and tear over time.

Taking preventative measures will save you time and money, preventing costly repairs and ensuring high performance from your lawn mower year-round!

Saving Money on Repairs

By taking care of your mower regularly, you can save yourself from expensive repairs and keep it running smoothly for years to come. Regular maintenance such as checking spark plug quality, air filters, fuel consumption and environmental impact will ensure the engine is performing at its best.

DIY repairs can help reduce costs significantly. Here are five ways to save money on lawn mower repair:

  1. Always check spark plugs for signs of wear or damage.
  2. Replace air filters if they become dirty or clogged.
  3. Monitor fuel consumption levels to make sure the engine’s running efficiently.
  4. Use environmentally-friendly fluids when servicing the machine.
  5. Make small adjustments rather than replacing whole parts whenever possible.

With these tips in mind, you’ll be able to maintain a healthy lawnmower without breaking your budget!

Frequently Asked Questions (FAQs)

How often should a spark plug in a lawn mower be replaced?

Maintaining your lawn mower’s spark plug is essential for better fuel efficiency, preventing overheating and avoiding costly repairs. It’s recommended that you replace the spark plug every season, or after 100 hours of use. To maximize its lifespan, check cables regularly and change oil filters when needed.
The process isn’t difficult – all you need is a wrench, socket set and spark gap gauge to make sure the part fits properly into place. With regular maintenance like this, you can keep your engine running smoothly year-round!

What is the best way to store a lawn mower with a spark plug installed for long periods of time?

Storing a lawn mower with a spark plug installed for long periods of time requires proper maintenance and preparation. To ensure the engine runs properly, you should check the sparkplug gap before storing it away. The ideal gap is determined by consulting your owner’s manual or contacting an authorized repair service.

Maintaining the sparkplug can help prolong its life; this means cleaning it regularly to remove any debris that may have built up over time, as well as replacing it when necessary according to manufacturer guidelines.

Taking these steps will keep your mower running smoothly when you’re ready to use it again after storage!

Are there any special precautions to take when replacing a spark plug in a lawn mower?

Replacing a spark plug in your lawn mower is important. To avoid any issues, take these precautions:

Troubleshoot potential problems.
Check the voltage.
Test the ignition coil.
Clean connections.

Use heat-resistant gloves when replacing the plug. Adjust gaps if necessary. Information on proper gap size can be found in your owner’s manual.

Following these steps will keep your engine running for years.

Is it necessary to lubricate the spark plug threads when installing a new spark plug?

You want your lawn mower running like a champ? Regular maintenance includes spark plug replacement, but don’t forget to lubricate the threads when installing a new one. Without proper lubrication, gap adjustment won’t be achieved no matter what spark plugs you use. Don’t forget this key step in your next project. Make sure those threads are properly lubricated for optimal performance.

Are there any safety hazards associated with working on a lawn mower that has a spark plug?

Working on a lawn mower that has a spark plug can be dangerous if safety measures aren’t taken. Electrical shock is one major risk, so it’s important to disconnect the battery before starting. Inspecting and replacing air filters regularly is essential for preventing sparks from igniting the fuel-air mixture inside the engine. Make sure to use the correct type of spark plug for your model; using incompatible types could lead to issues later.


You have the power to keep your lawn mower running efficiently and for a long time. Think of the spark plug as the heart of your lawn mower – if you don’t take good care of it, your lawn mower won’t run properly. Regular maintenance is the key to ensuring your lawn mower runs smoothly and efficiently.

Imagine your lawn mower as a car – it needs regular oil changes and tune-ups, and your lawn mower needs regular spark plug replacements. By following these steps and using the services of Hutson Inc, you can easily maintain your lawn mower and prevent costly repairs. Taking the time to maintain your spark plug will help your lawn mower run without issues for years to come.

To remove a lawn mower spark plug, you’ll need the following:

  • A spark plug wrench
  • A new spark plug
  • Protective eyewear
  1. Put on your protective eyewear and locate the spark plug.
  2. Unscrew the spark plug using the spark plug wrench.
  3. Remove the spark plug and inspect it for wear or damage.
  4. Install the new spark plug, making sure it is properly seated.
  5. Tighten the spark plug with the spark plug wrench.
  6. Reassemble the lawn mower and you’re done!
Avatar for Mutasim Sweileh

Mutasim Sweileh

Mutasim is a published author and software engineer and agriculture expert from the US. To date, he has helped thousands of people make their yards lush and thick.