Skip to Content

Rubber Tree Plant Care: Sunlight, Watering, Humidity & Temperature (2023)

This site is supported by our readers. We may earn a commission, at no cost to you, if you purchase through links.

rubber tree plant care tipsAre you looking for a low-maintenance plant to add life and elegance to your home? Consider the rubber tree. It’s well known for its shiny, rubbery leaves and easy care requirements. All it needs is some sunlight, water, humidity control, and regular repotting sessions.

With just minimal effort on your part, but plenty of reward in return, this beautiful houseplant can provide years of joy indoors or outdoors.

Rubber Tree Plant Care requires an understanding of light requirements, watering frequency, as well as humidity levels.

Key Takeaways

  • Rubber trees require bright, indirect sunlight for 6-8 hours daily.
  • Water once a week, allowing the soil to dry between waterings.
  • Maintain indoor humidity levels and mist leaves occasionally.
  • Prune in spring to stimulate new growth.

Rubber Tree Plant Care

Rubber Tree Plant Care
You’ll need to provide your rubber tree with bright, indirect sunlight for around 6 hours daily, along with watering about once a week, allowing the soil to dry out between waterings. Rubber trees thrive in average humidity and temperatures between 60-80°F, reaching impressive heights of up to 10 feet indoors with proper care.

Sunlight Requirements

Keep those rubbery leaves outta direct sun and in a bright corner where they can reach for indirect light through a nearby window.

  • 6-8 hours of bright, indirect sun daily
  • South or west-facing window ideal
  • Fading and yellowing leaves signal too little light
  • Leaf scorching from too much direct light
  • Rotate plant periodically for even growth

With the right balance of sunlight intensity and duration, your rubber plant’s foliage will remain a healthy, vibrant green. Monitor those leaves closely and adjust the plant’s positioning as needed to mimic its native growing conditions.

A bright space near an unobstructed window matches its preferred bright, indirect sunlight – just beware of overexposing tender leaves to harsh midday rays.

Watering Frequency

You must find a balance in letting the soil dry before quenching its thirst again.

Day 1 Water thoroughly, allowing excess to drain.
Day 15 Check soil moisture by poking a finger into the soil.
Day 29 If the soil is dry 2-3 inches down, water again.
Day 36 Repeat the drying and watering cycle.

Adjust the frequency based on light, temperature, humidity, and leaf conditions.

Humidity Needs

Domesticated rubber plants tolerate typical indoor humidity levels, though misting the leaves occasionally will keep them moist and help enhance growth. As indoor plants, rubber trees do well in average household humidity. Mist or wipe leaves every few days for moisture and sheen.

Indoor humidity rarely impacts rubber plant health if other care is correct. With proper lighting and moisture, rubber trees thrive at common indoor humidity levels.

Preferred Temperature

For peak health, it’s crucial your ficus elastica lives in temperatures from 65 to 85 degrees Fahrenheit.

  • Keep between 65-85°F for ideal growth
  • Can tolerate 50-60°F briefly
  • Avoid prolonged exposure below 50°F
  • Prevent dramatic temperature swings
  • Move away from heat vents and drafts

The rubber tree thrives in average household temperatures, with some seasonal adjustments needed in winter. Maintaining its preferred temperature range prevents cold damage and supports lush, healthy growth.

With a few accommodations, these versatile plants continue to flourish indoors year-round.

Growth Size

Even indoors, they’ll often reach heights of 6 to 10 feet – With proper care, rubbing on you, these plants can thrive in home settings! To control your rubber plant’s size inside, focus on limiting growth factors like ideal lighting, water, and fertilizer.

Timely pruning and repotting into smaller containers can also help restrict indoor height.

How to Care for Your Rubber Plant

How to Care for Your Rubber Plant
When it comes to rubber tree plant care, you’ll find this tropical plant is quite forgiving if you follow some basic guidelines for providing proper light, humidity, water, and occasional repotting. With just a little attention to its preferences for bright indirect light, warm humid air, a thorough soak and dry cycle, and a watchful eye on its root-bound state, your Ficus elastica will thrive indoors for years to come.

Easy Maintenance

You’d be surprised at how easy it is to keep your rubber plant happy and healthy with just a little TLC.

  • Provide bright, indirect light.
  • Allow the soil to dry between waterings.
  • Wipe leaves often to remove dust.

With just a few basic maintenance tips – proper lighting, watering based on dryness, and regular dusting – you can keep your rubber plant thriving for years to come.

Watering Guidelines

Take heart, for even desiccated leaves revive with a deep weekly drink. Adjust watering based on soil moisture and the health of lethargic leaves. Aim to hydrate the roots without overwatering; rubber plants have drought tolerance.

Light and Humidity Requirements

Let’s put your rubber plant in a bright, sunny spot to give those leaves the light they crave.

  1. Place near an east or south-facing window.
  2. Provide 6 to 8 hours of indirect light daily.
  3. Rotate the plant to prevent one-sided growth.
  4. Use sheer curtains to filter harsh light.
  5. Supplement with grow lights if needed.

Adequate lighting keeps the leaves lush and happy. Monitor the moisture since more light means more frequent watering.

Repotting Tips

Your rubber tree likely needs repotting in the spring once its roots start poking out the bottom, like when my neighbor’s 10-year-old rubber plant began tipping over from being root-bound. Carefully repot it in a container two sizes larger, teasing the root ball. Repot every two to three years for robust growth.

Extra Care and Maintenance

Avoid placing your rubber plant in drafty areas that may cause leaf damage.

  • Wipe leaves often to remove dust buildup.
  • Use horticultural oil for pest prevention.
  • Promote root health with proper watering.

Creative pruning and forming techniques keep your rubber plant healthy, while pest control and propagation allow you to expand your collection.

Understanding Rubber Plants

Understanding Rubber Plants
Beloved banyans, while native to Southeast Asia, still thrive within homes when cared for properly. Rubber plants offer homeowners beautiful leaf patterns and provide fresh air. Though their milky sap can irritate, we can safely enjoy these symbols of freedom and belonging through understanding basic care.

Variety Leaf Pattern Height
Burgundy Solid, oval 4-6 ft
Doescher Variegated 3-5 ft
Ruby Pointed, red-violet 5-7 ft

Rubber tree varieties bring visual interest indoors. Their native jungle habitats spanning Southeast Asia to Indonesia reach towering heights.

Through thoughtful watering, finding their perfect light levels, and keeping little fingers from sampling toxic sap, rubber trees thrive within our homes, delivering the essence of the wild to our living rooms.

Watering Guide for Rubber Plants

Watering Guide for Rubber Plants
Watering your rubber plant properly is crucial for keeping it healthy. Check the soil moisture before watering – stick your finger in the soil to gauge if it’s dry 1-2 inches down.

During the growing season, this is usually every 1-2 weeks. In winter, allow the soil to dry out more between waterings. Manage moisture by using well-draining soil, watering until it drains from the drainage holes, and dumping out excess water in the saucer.

Some hydration tips:

  • Allow soil to dry out between waterings
  • Water less often in winter
  • Use well-draining soil
  • Empty excess water from saucer

Proper hydration keeps your rubber plant happy and prevents issues like root rot from overwatering. Check the soil and adjust your watering schedule and techniques as needed based on the season, light levels, and your plant’s needs.

Providing Light and Humidity for Your Rubber Plant

Providing Light and Humidity for Your Rubber Plant
Place it near an east or west-facing window so its leaves can soak up the bright indirect sunlight they crave. Rubber trees thrive in humid conditions, so mimic their native environment by misting the leaves every couple of days.

This prevents the tips from browning while adding that all-important dose of humidity.

Monitor the soil moisture as well since the two go hand in hand. Let it dry out some between waterings, but not completely.

Northern exposures work too with enough supplemental lighting. Go for fluorescent or LED grow lights to keep your rubber tree hearty. Play around with both the photoperiod and distance from the plant until you dial in the perfect indoor lighting combo.

And don’t stress minor leaf drop. It’s natural for these rainforest natives, signaling the changing light and moisture levels indoors. Just focus on providing ample filtered sunbeams and humidity, and your rubber tree will reward you with glossy, vibrant growth.

Repotting Your Rubber Plant

Repotting Your Rubber Plant
Spring gently nudges you to unwrap your plant from its confines, allowing expanded roots to stretch in their new home. As rubber plants mature, their root systems expand and eventually become root bound.

Repotting into a container just 2-4 inches larger provides the perfect amount of extra room for additional growth.

Aim to repot in early spring before the growing season when the plant isn’t actively pushing new leaves. Prepare fresh, well-draining potting mix amended with compost or worm castings to nourish developing roots.

Gently loosen the root ball, place it in the new pot, and backfill with prepared soil.

With proper repotting care, your rubber plant will be poised to thrive through another season.

Caring for Your Rubber Plant With Extra Attention

Caring for Your Rubber Plant With Extra Attention
Keep those gorgeous glossy leaves looking their best by giving your ficus some extra TLC. Check soil moisture regularly and mist leaves often to maintain that dazzling sheen. Prune in spring to stimulate bushy new growth. Use neem oil or insecticidal soap to prevent pests like mealybugs.

Wipe leaves down monthly with a damp cloth to get rid of dust. Repot every couple of years in fresh soil to encourage healthy roots. Take a few cuttings to propagate new plants. With a little attentive care, your rubber plant will continue to thrive for years to come.


Having a rubber tree plant in your home is a great way to bring the beauty of nature inside. With the right knowledge and proper care, you can ensure that your rubber tree plant thrives for many years to come.

When caring for your rubber tree, it’s important to understand the ideal light requirements, watering frequency, humidity needs, and preferred temperature.

To get the most out of your rubber tree, be sure to follow a regular watering schedule, provide adequate light and humidity, and repot when needed. Furthermore, be sure to provide extra care and attention to your rubber tree plant to ensure it remains healthy.

With the right care and attention, your rubber tree plant will remain a beautiful addition to your home for years to come.

Avatar for Mutasim Sweileh

Mutasim Sweileh

Mutasim is a published author and software engineer and agriculture expert from the US. To date, he has helped thousands of people make their yards lush and thick.